Ender 3 V3 KE Bed Spacers for Leveling
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spacers that are taller and shorter in increments of 0.25mm from nominal height
- Ocena
- 5 / 5
- Polubienia
- 182
- Pobrania
- 1427
- Wydruki
- 4
- Wyświetlenia
- 6527
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
These spacers are to help get the bed of the Ender 3 V3 KE (and SE) as flat as possible. These also have the spacer height on the OD to make it easier to identify if you print more than one or two.
The 13mm spacer is used both in the front left and rear left corners, which have the load cell and the heater bed anchor/strain relief. The 16mm spacers are for the right side corners.
I'd recommend printing these in ASA or Nylon for the least amount of thermal expansion. If you print in PLA or PETG, these will soften and cause more headaches than they solve. Ask me how I know lol.
I have also included the parametric .f3d file if you want to change the spacer height for either the tall or short spacers. I used the Parametric Text add-in to generate the text for the OD of the spacers in case I wanted to print different heights. If you install the add-in, everything should work with no issues…if I've understood the introduction page correctly.
If you want to install the add-in so you can change the spacer heights and have the sizes update: Parametric File Download - Google Drive