Wheel mount for Albert Heyn foldable crates
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wheel mount for foldable crates used for grocery delivery by Albert Heyn (AH Netherlands).
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 134
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I use the foldable crates from Albert Heyn for the storage of some supplies. I wanted to move the crate around more easily, so I added some casters without adding too much to the height of the crate.
I found this small fixed caster and bought it here. The casters tiedly fit on the mount and are fastened by a small peg that I glued from the back with a drop of superglue.
The mount was printed on a Prusa MINI+ with the printer setting “0.20mm SPEED” setting. The pegs were printed horisontal (for more strength) with the setting: “0.10mm DETAIL” and auto generated “snug” support. See the 3mf files for details. Both were printed with Poly Terra PLA.
This project had another goal for me: learning and using FreeCAD/Ondsel. Probably less material could be used. I'm open for suggestions.