Wheel mount for Albert Heyn foldable crates
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wheel mount for foldable crates used for grocery delivery by Albert Heyn (AH Netherlands).
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 14
- Makes
- 0
- Views
- 134
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I use the foldable crates from Albert Heyn for the storage of some supplies. I wanted to move the crate around more easily, so I added some casters without adding too much to the height of the crate.
I found this small fixed caster and bought it here. The casters tiedly fit on the mount and are fastened by a small peg that I glued from the back with a drop of superglue.
The mount was printed on a Prusa MINI+ with the printer setting “0.20mm SPEED” setting. The pegs were printed horisontal (for more strength) with the setting: “0.10mm DETAIL” and auto generated “snug” support. See the 3mf files for details. Both were printed with Poly Terra PLA.
This project had another goal for me: learning and using FreeCAD/Ondsel. Probably less material could be used. I'm open for suggestions.