Paper clip zipper pull repair
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Zipper pull replacement part. Two parts that are glued together around a small paper clip.
- Ocena
- 4,5 / 5
- Polubienia
- 7
- Pobrania
- 57
- Wydruki
- 2
- Wyświetlenia
- 354
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Public Domain
A two part printed shell for a paper clip to be used as a zipper pull replacement part. Glue together.
See the photos for shape and size of two examples of paper clips that should work. If your paper clip is slightly different shape/size it might work but may require a bit of bending to make it fit in the shell cavity.
Remember to insert the paper clip into the broken zipper before gluing. ☺
Super glue (CA glue) seemed to work ok for me when printed in either PLA or PETG. I would not recommend printing from PLA if using this for clothing that will be worn outside in the sun. PETG will probably work ok.