Paper clip zipper pull repair
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Zipper pull replacement part. Two parts that are glued together around a small paper clip.
- Rating
- 4.5 / 5
- Likes
- 7
- Downloads
- 57
- Makes
- 2
- Views
- 354
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Public Domain
A two part printed shell for a paper clip to be used as a zipper pull replacement part. Glue together.
See the photos for shape and size of two examples of paper clips that should work. If your paper clip is slightly different shape/size it might work but may require a bit of bending to make it fit in the shell cavity.
Remember to insert the paper clip into the broken zipper before gluing. ☺
Super glue (CA glue) seemed to work ok for me when printed in either PLA or PETG. I would not recommend printing from PLA if using this for clothing that will be worn outside in the sun. PETG will probably work ok.