PFEIFER | Mini Power Whistle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Meet PFEIFER, a tiny but very very powerful pebble-shaped whistle.
- Ocena
- 4,867 / 5
- Polubienia
- 879
- Pobrania
- 3621
- Wydruki
- 59
- Wyświetlenia
- 13 385
- Oceny
- 45
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Public Domain
PFEIFER | Mini Power Whistle
Meet PFEIFER, a tiny but very very powerful pebble-shaped whistle.
It takes only 10g to print and is available in 2 sizes, Regular and Mini, and a variety of tones:
- Regular in mid-tone 2.5KHz
- Regular in high-pitch 4KHz
- Regular in dual tone (2.5KHz + 3.5KHz)
- Mini in high-pitch 4KHz
- Mini in mid-tone 2.5KHz
Our cute rescue dog responds surpisingly well to the 4KHz.
Don't mind the print quality on the pictures.
I live in Taiwan (but I'm French.. long story..) and raining season just kicked.
It's so humid it's almost impossible to get my prints right.
Anyway...
Happy printing!
V2 UPDATE:
The keyhole on V1 versions was a bit too small, so was enlarged on V2.
DIMENSIONS (Regular) | W 35 mm x D 15 mm x H 50 mm
DIMENSIONS (Small) | W 30 mm x D 15 mm x H 36 mm
PRINTING | 30min
All STL files are already oriented properly.
Infill: 20%
Wall line count: 2
Resolution: 0.2~0.3mm/layer or less (the bases in the pictures were printed in 0.2mm/layer)
Build adhesion type: Brim 4mm
Supports: None