Bastion Extended Frame Skirt

Quick and simple skirts to contain your rolo brand spaghetti on your Bastion Extended Frame printer. The usual rolohaun print settings apply -- 4 walls, 4 top/bottom layers, 30% infill. All but the rear skirts can be printed without supports. Source file included if you want to try your hand at designing your own repeating pattern.

Basic Skirt.stl - As the name implies, a simple repeating pattern suitable for the front or sides.

Skirt with Button.stl - Adds a hole to mount a generic 16mm momentary pushbutton for klipper gcode_button purposes. I use mine for turning my lights on and off:

[gcode_button lights_toggle]
pin: !ender: PA5
press_gcode:
    SET_LED LED=case_light WHITE={0 if printer['led case_light'].color_data[0][3] else 1 }

Skirt with Cutout.stl - Adds a hole in the top-left corner for feeding small wires through. In my case, I did this for a USB cable for a webcam.

Rear Skirt.stl - Designed to go on the back. The mounts are different (with wings attaching to the adjacent corner pieces) and there's a cutout for the stepper mount and the power inlet.