LayersFactory
Report model
1 / 4
Bastion Extended Frame Skirt — image 1
1 / 4

Bastion Extended Frame Skirt

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Model information

Source
Printables
Category
Other Printer Parts & Upgrades
License
BSD License
DetailsMakes & commentsRemixesCollectionsRelated

Quick and simple skirts to contain your rolo brand spaghetti on your Bastion Extended Frame printer. The usual rolohaun print settings apply -- 4 walls, 4 top/bottom layers, 30% infill. All but the rear skirts can be printed without supports. Source file included if you want to try your hand at designing your own repeating pattern.

Basic Skirt.stl - As the name implies, a simple repeating pattern suitable for the front or sides.

Skirt with Button.stl - Adds a hole to mount a generic 16mm momentary pushbutton for klipper gcode_button purposes. I use mine for turning my lights on and off:

[gcode_button lights_toggle]
pin: !ender: PA5
press_gcode:
    SET_LED LED=case_light WHITE={0 if printer['led case_light'].color_data[0][3] else 1 }

Skirt with Cutout.stl - Adds a hole in the top-left corner for feeding small wires through. In my case, I did this for a USB cable for a webcam.

Rear Skirt.stl - Designed to go on the back. The mounts are different (with wings attaching to the adjacent corner pieces) and there's a cutout for the stepper mount and the power inlet.

Tags

bastion