1 / 3
Gridfinity, 9x 1/8" (3mm) Bit Holder, 1x1x4 or 6, Magnet Holes
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
1x1 holder for 1/8 inch (3mm) bits. 2 heights available (4=31.75 or 6=45.75mm). With magnet holes.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 225
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (18)Powiązane
1x1 holder for 1/8 inch (3mm) bits. Available in two heights (4=31.75 or 6=45.75mm). With magnet holes. Bit holes are 22mm deep.
Easy print, no supports needed.