Workmate Peg Large
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
My Black & Decker Workmate peg’s clips had broken so this is a remix of the model from Joel C which he kindly supplied the .step file so I could resize it. This model is resized to fit the later larger Black & Decker Workmate peg with a rubber face.
It is designed to be printed on its face out of PETG with supports from the print bed. I printed it on my Mk4 with 4 perimiters and 30% infill from Prusament Orange PETG.
I suggest printing with the peg arranged at 45 degrees so the clips are pointing towards the cooling fan and set the fan to maximum on the Mk4, otherwise one corner of the cylinder body can curl causing which could cause a print failure.
I carefully removed the original rubber face, cleaned it with Acetone then glued it with Superglue to the new PETG printed one.