Mini Lighsaber single piece
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I liked the mini Lightsaber, but I found it to be rather fragile, especially at the joints. I decided to remix it so…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 74
- Wydruki
- 0
- Wyświetlenia
- 426
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I liked the mini Lightsaber, but I found it to be rather fragile, especially at the joints. I decided to remix it so that I could print the blade all in one piece. I also felt that the 3 parts connected were a little too long. The blade is 270mm in height, so take that into account when printing.
I also laid the joint flat on an edge so that it can be printed with 100% infill and make it a more rigid piece and less susceptible to breaking. Use a little bit of glue on both ends to get a nice solid piece.
Print Settings
Printer:
Creality CR-10
Rafts:
No
No
Resolution:
.2
50%
Category: Toys & Games