Mini Lighsaber single piece
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I liked the mini Lightsaber, but I found it to be rather fragile, especially at the joints. I decided to remix it so…
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 74
- Makes
- 0
- Views
- 426
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I liked the mini Lightsaber, but I found it to be rather fragile, especially at the joints. I decided to remix it so that I could print the blade all in one piece. I also felt that the 3 parts connected were a little too long. The blade is 270mm in height, so take that into account when printing.
I also laid the joint flat on an edge so that it can be printed with 100% infill and make it a more rigid piece and less susceptible to breaking. Use a little bit of glue on both ends to get a nice solid piece.
Print Settings
Printer:
Creality CR-10
Rafts:
No
No
Resolution:
.2
50%
Category: Toys & Games