1 / 3
Magnetic Holder for Expandable Steel Sheet Holder (MK4, MK3, Mini, etc. with 10mm spacing) — zdjęcie 1
1 / 3

Magnetic Holder for Expandable Steel Sheet Holder (MK4, MK3, Mini, etc. with 10mm spacing)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Fixture that provides a magnetic catch for each steel sheet in an Expandable Steel Sheet Holder, using 10x5mm magnets.

Ocena
5 / 5
Polubienia
10
Pobrania
41
Wydruki
3
Wyświetlenia
310
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Magnetic catch to keep sheets fully engaged in their slots.  Should work with most variations and remixes of @Whity's Expandable Steel Sheet Holder, as long as they retain the 10mm spacing between sheets.  Models provided for 1, 2, 3, 4, and 5 sheets.

Requires 10mm diameter, 5mm thick magnets.  I used the magnets linked below, but beware that sellers frequently change their supply so measure what you receive to verify they are really 10x5mm:  https://www.amazon.com/gp/product/B0BVH1PLM1

Simply slide the magnets in from the bottom and hold them in place while mounting. The screw hole is designed for a single #6 (3.5mm) button head wood screw.

Recommend printing as oriented from STL, using PrusaSlicer's Organic supports.
 

Tagi