Iwata Eclipse Needle Keeper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Organize and store your 0.35mm and 0.5mm needle, nozzle, and cap
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 237
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Segregate and safely store the parts needed to swap (most) Iwata Eclipse series airbrush between 0.35mm and 0.5mm nozzles. Anyone who has gone down this path knows the parts are nearly identical and have almost no distinguising characteristics, this will keep them safely separated and allow you to store them without worrying about them getting lost, mixed up, or damaged!
Designed around the Iwata 0.35mm P/N 617-2, 604-2, 602-2 and the 0.5mm P/N 617-1, 604-1, and 602-1.
Note: As I was listing the P/N I realized that its actually a 0.35mm and not 0.3mm like the text on the model :( I'm too lazy to fix that so I've included a model without the imbedded text. And if if bothers you that much, please feel free to check out the OnShape file and do with it what you will!
- EclipseNeedleKeeper_CaseMkI.3mf is set up for AMS two-color printing so the text stands out
- EclipseNeedleKeeper_LidMkI.3mf will work with either case (with or without text) It is included as a separate file to make it easier to print the case with embedded text.
- EclipseNeedleKeeper_NoTextMkI.3mf includes both the lid and case models without the text