L3VER M3 AWD combo (VCORE 3.1) Enclosure 2.0
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An evolution of the M2 L3ver with an AWD integration to a simpler implementation, Actually work natively for VCORE 3.x
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 84
- Wydruki
- 0
- Wyświetlenia
- 675
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
An evolution of the M2 L3ver with the BRS AWD drive integration to a simpler implementation, Actually work natively for VCORE 3.0 and extensively 3.1.
Unit made to fit Vcore equipped with enclosure 2.0 (no needs for the 3030 front extrusion)
Allow you to make the belt tension and the adding of the AWD shaper for a higher torque application, best print result, more speed and acceleration (x2-x3) This specific model take back the same AWD advantages than the AWD Drive and features a long belt contact to the pulleys to the best torque application.
Fit Stock VCORE 3.0 or 3.1 with top Leadcrew retainers, fits Z-Upgrade 2.8 DE Ballscrews mod; Z-upgrade 1.0-2.0
Available on the BRS STORE
GITHUB PAGE: https://github.com/FlorentBroise/BRS-Printers-Mod/blob/main/products.md
Presquisite: needs https://www.printables.com/model/616219-vcore-31-stock-rear-block-mirrored
BOM and Manual incoming