Keyhole cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A very simple functional print to prevent dirt from entering the keyhole
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 297
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
The keyhole for the underseat storage is right above the the rear wheel, meaning that the keyhole gathers a lot of dirt, and thus damaging the lock.
(keyhole, already cleaned a lot)
So that needs to be solved! A mudguard is difficult (complex geometry to connect to) and not really pretty, so the most simple solution might be the best - directly cover the keyhole.
A simple disc (PETG just to be sure) with a 6x2 mm magnet seems to do the trick. It's sticky enough to remain in place and prevents 99.9% of the dirt entering the lock. Job well done in my opinion :-)
Happy printing!