Schraubkralle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Screw Holder Clamp Claw Gripper for Mounting Screw, Mounting Adjustment Screw Gripper Holding Tool, Hand Screw Clamp
- Ocena
- 5 / 5
- Polubienia
- 210
- Pobrania
- 581
- Wydruki
- 5
- Wyświetlenia
- 2407
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
TL;DR
Tool to hold a screw on top of a bit in two sizes for short and long bits.
Long story
Evolution of a functional 3D model
Saw this and thought i could made much cheaper ones
First version was to brittle for PLA (worked with PETG and TPU)
Some DIY guys in reddit asked for a small but very cool modification to make it possibly to screw down the screw without breaking the claw. That was the second evolution step.
finally today the 3. evolution
A short version for typical bits and a longer ones for long bits and T-handle bits. The longer one allows you to screw down the screw without the need to remove the tool.
The short one is still best to print in TPU / PETG the longer one can be printed in PLA to without breaking while screwing down to the end.
Filament
White PETG.