Schraubkralle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Screw Holder Clamp Claw Gripper for Mounting Screw, Mounting Adjustment Screw Gripper Holding Tool, Hand Screw Clamp
- Rating
- 5 / 5
- Likes
- 210
- Downloads
- 581
- Makes
- 5
- Views
- 2,407
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
TL;DR
Tool to hold a screw on top of a bit in two sizes for short and long bits.
Long story
Evolution of a functional 3D model
Saw this and thought i could made much cheaper ones
First version was to brittle for PLA (worked with PETG and TPU)
Some DIY guys in reddit asked for a small but very cool modification to make it possibly to screw down the screw without breaking the claw. That was the second evolution step.
finally today the 3. evolution
A short version for typical bits and a longer ones for long bits and T-handle bits. The longer one allows you to screw down the screw without the need to remove the tool.
The short one is still best to print in TPU / PETG the longer one can be printed in PLA to without breaking while screwing down to the end.
Filament
White PETG.