Bearing MR128 8x12x3,5, functional
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bearing MR128 8x12x3,5
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 877
- Wydruki
- 3
- Wyświetlenia
- 1623
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Search the web, and could not find a functional bearing with this dimensions.
So I create one in a simple way and for fast print.
The bearing has no rolls inside. The inner ring has a tap, so it could not fall out.
I printed the bearing on my Ender 3 pro and P1S without problems in PLA and PETG.
Not every printer and material is the same, so I add the .step file for easyer up- or downscaling for your needs.
To print the bearing use a very low speed (about 20mm/s), Arachne Wall Generator, Z-Seam Random and reduce the flow rate to 90%.
Its used in static models and toys.
Hope its useful for others.
Have fun.