Ikea Kallax Cable Routing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cable routing for the back side of the 2x4 Kallax (works for 2x2 as well). Allows to route cables behind shelves.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 327
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
Cleanly route cables behind your Kallax. You'll need support for this print unless you find a way to split it elegantly. Keep in mind that those cable routing pins are not too rigid when they are printed perpendicular to the layer lines. If you are routing thick power cables and don't want them to break off immediately, print it on its side. I would recommend a tougher material than PLA.
My designs are released under a public domain license: You can do whatever you want with them. I put as much care and attention to detail into them as if they were commercial products. If my design solved a problem for you, I'd like to invite you to donate me a quarter of a filament spool. These little gestures go a long way and are quite motivating. Thank you!
