1 / 4
Prismatic Vase Mode Silica Gel Container. Super fast print — zdjęcie 1
1 / 4

Prismatic Vase Mode Silica Gel Container. Super fast print

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Square shape, ventilation holes, precise dimensions, multiple sizes and VASE MODE. What could you ask more?

Ocena
4,667 / 5
Polubienia
30
Pobrania
161
Wydruki
3
Wyświetlenia
981
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Share Alike

The main advantage of this container is the use of vase mode, which reduces a lot the print time.

Please look at the pictures, where you can find most of the instructions.

BODY

15 different body sizes are available (X, Y)

40x25, 40x40, 40x50        [mm]

50x25, 50x40, 50x50        [mm]

60x25, 60x40, 60x50        [mm]

80x25, 80x40, 80x50        [mm]

100x25, 100x40, 100x50   [mm]

For each size, you can choose between 4 heights: 25, 50, 75, 100 mm.

This model is designed for vase mode. Please select a Wall Line Width above 0.7mm to make the parts strong enough. You can achieve this with a 0.4mm nozzle by lowering the print speed and, if necessary, increasing a bit the temperature.

LID

Two lid design are available: 

FlexyLid (Experimental)

 

This design uses a 0.2mm gap on the arm to enable flexing in order to latxh onto the body. Thanks to the front latxh, once the lid is fully seated, it can prevent the beads from falling, even if layed down. 

It needs an elastic filament able to flex before breaking. I only tested it in PETG, so that's the material I recommend.

 

Dual Lid 

 

 

 

 

 

 

 

 

Simpler design, has no particular material requirement. The only downside is that it risks spillage when stored in the layed down orientation. I strongly suggest using a rubber band to prevent it from opening.

The little recession around the lid enables a thin 1mm rubber band to sit flush without protruding.

 

 

 

If this has been helpful to you, saved you some time or some money, please consider supporting me with a tip trough Ko-fi.

https://ko-fi.com/addictivemanufacturing

 

Tagi