1 / 7
Walking stick TPU end (for Decathlon Forclaz MT500) — zdjęcie 1
1 / 7

Walking stick TPU end (for Decathlon Forclaz MT500)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

TPU end for decathlon walking stick. The 100 % model is a very tight fit. Print at 101% or 102% for a looser fit.

Ocena
5 / 5
Polubienia
11
Pobrania
49
Wydruki
2
Wyświetlenia
273
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Cap for the Decathlon Forclaz MT500 walking sticks. They are quite loud without any cap on the end when walking on hard surfaces (road or rocks) Therefore I modelled an endcap to print in TPU

 

At 100% the model is a very tight fit. The harder your flexible filament is, the tighter you need your fit. 
For example, Fiberlogy's 40D requires printing at 101 or 102% because it is quite flexible and very grippy. 
Fiberlogy's PP is a lot harder and can fit nicely at 100% size. 

Tagi