1 / 7
Walking stick TPU end (for Decathlon Forclaz MT500)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
TPU end for decathlon walking stick. The 100 % model is a very tight fit. Print at 101% or 102% for a looser fit.
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 49
- Makes
- 2
- Views
- 274
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
Cap for the Decathlon Forclaz MT500 walking sticks. They are quite loud without any cap on the end when walking on hard surfaces (road or rocks) Therefore I modelled an endcap to print in TPU
At 100% the model is a very tight fit. The harder your flexible filament is, the tighter you need your fit.
For example, Fiberlogy's 40D requires printing at 101 or 102% because it is quite flexible and very grippy.
Fiberlogy's PP is a lot harder and can fit nicely at 100% size.