Elegoo Neptune 4 / 4 Pro sequential printing buildplate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Buildplate to indicate N4/4P two-zone heatbed and the zone to leave free for sequential / continuous printing
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 106
- Wydruki
- 0
- Wyświetlenia
- 1026
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Consider tipping me 100g of filament for prototyping if I've saved you some time :) really appreciated
Download the STL and place it under Upload to Printer Settings > Basic Information > Printable Area > Model > Load in OrcaSlicer
Set also the following settings to center the print on the new middle of the plate:
Printer Settings > Best Object Position > y : 0.40
If you haven't already, go in Printer Settings > Basic Information > Printable Area, and set size to 225 for both coordinates, and Origin -5 for both coordinates
You could also exclude the interested bed area, with the following code in “Exluded bed area”:
5x180, 230x180, 230x230, 5x230
