bowden mount for the 35015 print head by PapaSchlumpf KUSBA version
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted a good non permanent way to mount a bowden tube to the print head, this is designed for a m6 ptfe fitting
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 161
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
the grey version is the one posted here
v3 coming soon as I am still not happy with the amount of flex
simple bowden mounting point using the KUBSA mount on the printhead, I am currently printing this version, I have printed a v1 before which worked but flexed more than I would like and did not sit completely flush with the print head,
I used m3x10 screws with 2 nuts to adjust the spacing, I will update this once I have the new version mounted and will add more photos
currently designed for a m6 ptfe connector, since that is what I had on hand, considering making a version for m10 but not sure if it is worth it, very easy to print with one side being flat