bowden mount for the 35015 print head by PapaSchlumpf KUSBA version
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I wanted a good non permanent way to mount a bowden tube to the print head, this is designed for a m6 ptfe fitting
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 14
- Makes
- 0
- Views
- 161
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
the grey version is the one posted here
v3 coming soon as I am still not happy with the amount of flex
simple bowden mounting point using the KUBSA mount on the printhead, I am currently printing this version, I have printed a v1 before which worked but flexed more than I would like and did not sit completely flush with the print head,
I used m3x10 screws with 2 nuts to adjust the spacing, I will update this once I have the new version mounted and will add more photos
currently designed for a m6 ptfe connector, since that is what I had on hand, considering making a version for m10 but not sure if it is worth it, very easy to print with one side being flat