CREDIT CARD SIZED PHONE STAND
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a phone stand of the size of a credit card so it can be easily stored in your wallet.
- Ocena
- 5 / 5
- Polubienia
- 28
- Pobrania
- 207
- Wydruki
- 3
- Wyświetlenia
- 1063
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a phone stand of the size of a credit card so it can be easily stored in your wallet. I decided to design my own because I couldn't find any that was thin enough (mine is 1 mm thick) and also stable enough. It can be used with the phone on the side as well as standing.
Super easy and fast to print.
It prints in only 35 min!!! with the base speeds of the Creality Ender 3.
Warnings:
-Bending for the first time the part that holds back the phone might be a bit stiff but no worry this is totally normal.
-You'll need a great first layer to avoid bonding between the different moving parts.
If you have any questions send me a message or leave a comment ;)
Happy 3D printing ;)
Printing:
I recommend PLA (I tried PETG but it has a bit more flex so the phone is a bit less stable)
Layer height: 0.2 (I designed it to be printed at this layer height)
Nozzle: 0.4 (bigger might work but I haven't tried it yet)
Wall line: 3 or more
Infill: shouldn't matter because it's 1mm thick so it should be solid