1 / 4
Sandisk Extreme SSD mount on NP-F Battery Cover — zdjęcie 1
1 / 4

Sandisk Extreme SSD mount on NP-F Battery Cover

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mount Sandisk Extreme SSD on NP-F battery cover used on Blackmagic Assist 12G

Ocena
0 / 5
Polubienia
5
Pobrania
56
Wydruki
0
Wyświetlenia
525
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I merged the Sandisk Extreme external SSD mount on the NP-F Battery cover slot remix. I had to widen the Sandisk mount, because my 1TB drive must be a different model number. The original was slightly too small. I also closed part of the bottom to hold the ssd a little better, but added an opening to the left for the USB C cable. Then I added a fillet to the bottom edge.

First I tried to line the top of the battery cover to the inside of the mount for a lower profile, but it would not fit in the battery slot on my Blackmagic Assist 12G 5".

 

Update
I added a version where the mount is shifted to the right slightly and updated the f3d file. This is so it can fit with with the U bracket I designed for the Blackmagic Video Assist 12G 5".

Tagi