1 / 2
MDF Slatwall/Slotwall Adapter for Open Armory Louvered Wall Mounts
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter to allow louvered wall mounts from Open Armory to work with MDF T-shaped slatwall/slotwall.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 70
- Wydruki
- 0
- Wyświetlenia
- 487
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (20)Powiązane
Use wallmounts from Open Armory: https://www.printables.com/model/413796-open-armory with MDF slatwall/slotwall panels.
Access to the edge of the panel is necessary, these are slid in from the end. Two widths provided, full and half width. You can just use two of the half-widths if space is limited.
Currently only tested with ‘single-rail’ mounts (magazine holders), spacing does not work with ‘dual-rail’ mounts (like for rifles).