Radio Control Plane Setup Model
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3d printable model for helping you program your transmitter.
- Ocena
- 0 / 5
- Polubienia
- 45
- Pobrania
- 304
- Wydruki
- 0
- Wyświetlenia
- 2269
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
A fully 3D printable plane model with a 4 servo wing and V-tail, this is designed to help you learn how to program your transmitter without risking damage to your plane or having to have a full size plane sitting on your table!
It has been designed to be modular so that you can choose between different tail configurations (V-tail and conventional tail fuselage) depending on your needs, the parts are held together with the use of magnets.
Print instructions:
0.3mm layer height
ensure that the parts are orientated so that the first layer goes down perpendicular to the hinge line of the control surfaces.
Required parts:
6 generic 9 gram servos
push rods and fitting
6 10x2mm magnets