1 / 4
Bresser MQTT Arduino project enclosure snap-fit — zdjęcie 1
1 / 4

Bresser MQTT Arduino project enclosure snap-fit

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A project enclosure for a 40x60mm prototype PCB with a nodeMCU ESP8266.

Ocena
0 / 5
Polubienia
0
Pobrania
13
Wydruki
0
Wyświetlenia
203
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I got the Bresser MQTT project working and I've modelled a nice and small enclosure for it.

This can be used as a base for other projects on a 40x60 prototype PCB. When a nodeMCU ESP8266 in soldered in the exact place as on my print, the USB port on the microcontroller can be used for power and even reprogramming without the need for the enclosure to be opened.

There is a hole for a 3mm LED.

I've embedded the Bresser logo in the top half. I've also modelled the logo so you can print it in a contrasting colour. I chose not to, but the logo prints in about 10 minutes, so please do experiment!

There is no intent or interest to use this enclosure in any commercial way. The logo is used as a hommage to my brilliant weather station. Please Bresser, be kind! :)

Tagi