1 / 4
Bresser MQTT Arduino project enclosure snap-fit — image 1
1 / 4

Bresser MQTT Arduino project enclosure snap-fit

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A project enclosure for a 40x60mm prototype PCB with a nodeMCU ESP8266.

Rating
0 / 5
Likes
0
Downloads
13
Makes
0
Views
203
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial — Share Alike

I got the Bresser MQTT project working and I've modelled a nice and small enclosure for it.

This can be used as a base for other projects on a 40x60 prototype PCB. When a nodeMCU ESP8266 in soldered in the exact place as on my print, the USB port on the microcontroller can be used for power and even reprogramming without the need for the enclosure to be opened.

There is a hole for a 3mm LED.

I've embedded the Bresser logo in the top half. I've also modelled the logo so you can print it in a contrasting colour. I chose not to, but the logo prints in about 10 minutes, so please do experiment!

There is no intent or interest to use this enclosure in any commercial way. The logo is used as a hommage to my brilliant weather station. Please Bresser, be kind! :)

Tags