1 / 4
Next Gen Safety Enclosure Spool Holder Adapter for Prusa MK4
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an adapter to attach the provided MK4 spool holder to the Next Gen Safety Enclosure.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 269
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
The goal of this design is to connect the provided MK4 spool holder to the Next Gen Safety Enclosure with the minimal printing and parts. It was spilt into multiple parts to increase strength and avoid any supports.
Once printed you can attach this to the enclosure with provided 5 hole plate and hardware.
I would highly recommend:
- A 12mm piece of 4mm PTFE tubing to reduce drag.
- Original Prusa Spool Holder Remix
Printed in Clear PETG to increase light, but in hindsight regular PETG would be just as effective.