1 / 9
Handpan stand
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple 3-leg-stand for Handpans build with 24mm broomsticks for playing staying upright
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 64
- Wydruki
- 1
- Wyświetlenia
- 764
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 1) (Komentarze: 4)Remiksy (1)Kolekcje (16)Powiązane
You need:
- 3x 100cm Woodstock ⌀ 24mm
- 3x melt-in thread M4
- 6x wood screws for antislip-caps
- 4x M4 20mm screws
- 200cm Paracord ca. ⌀ 4mm
What to do:
- Print 1 ring, 6 anti slip-caps & plugs and 2 rope-chinch
- Ring printed wit PETG (50% infill), Antislip caps printed with TPU
- Insert melt-in threads into ring from outside
- Shorten broomsticks to 100cm from both sides, so you get flat ends
- Mark 40cm from one side
- Drill a 4mm hole in every of the three broomsticks, but only ca. ⅔ of diameter - exactly at the right angle
- Screw antislip-caps with wood-screws on top and bottom of every broomstick and close holes with plugs
- Put all 3 broomsticks into the ring and screw M4 screws through the ring into the holes in the broomsticks - not to tight
- Place stand, mark with drilling-guide holes for paradors on top & bottom and drill through drilling-guide
- Use paracord and rope-chinch on top and bottom to stabilize in your height
Have a lot of fun playing standing upright with you hardpan! If you want to build a stand for playing sitting on a chair simple use shorter woodsticks.