1 / 9
Handpan stand
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple 3-leg-stand for Handpans build with 24mm broomsticks for playing staying upright
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 64
- Makes
- 1
- Views
- 764
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Noncommercial
You need:
- 3x 100cm Woodstock ⌀ 24mm
- 3x melt-in thread M4
- 6x wood screws for antislip-caps
- 4x M4 20mm screws
- 200cm Paracord ca. ⌀ 4mm
What to do:
- Print 1 ring, 6 anti slip-caps & plugs and 2 rope-chinch
- Ring printed wit PETG (50% infill), Antislip caps printed with TPU
- Insert melt-in threads into ring from outside
- Shorten broomsticks to 100cm from both sides, so you get flat ends
- Mark 40cm from one side
- Drill a 4mm hole in every of the three broomsticks, but only ca. ⅔ of diameter - exactly at the right angle
- Screw antislip-caps with wood-screws on top and bottom of every broomstick and close holes with plugs
- Put all 3 broomsticks into the ring and screw M4 screws through the ring into the holes in the broomsticks - not to tight
- Place stand, mark with drilling-guide holes for paradors on top & bottom and drill through drilling-guide
- Use paracord and rope-chinch on top and bottom to stabilize in your height
Have a lot of fun playing standing upright with you hardpan! If you want to build a stand for playing sitting on a chair simple use shorter woodsticks.