Dice Dice Tower
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wanted to make a literal dice tower, so here are a few different models.
- Ocena
- 4,333 / 5
- Polubienia
- 123
- Pobrania
- 559
- Wydruki
- 3
- Wyświetlenia
- 4067
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
So, after having had some fun while making this, I realized that it could use some fixing up. Therefore I made a few different options.
You can choose between:
- small fence
- large fence
- with or without inside walls/steps
- double fence
- uneven fence
- with or without inside walls/steps
- with or without support needed
I think my personal favourite is the uneven fence with inside walls/steps. Printing it with or without supports is up to you, but if you print the one without support, you will need to glue the pieces together afterwards.
Most of the prints definitely needs support, and I would suggest organic support painted in under the corners on the top two dice. Maybe also on the top of the exit hole.
… After having printed the the with a small and large fence and realizing that the dice shot out too fast, I made a few new models with taller and bigger fence. Hopefulle that will help.
Have fun!