Raspberry Pi 2 Zero Mount for 70x70 Fan Quick & Dirty
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
quick & dirty model for cooling a pi zero 2w
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 116
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
on a weekend my original cooling fan of the pi zero 2 get faulty, but i had to do some prints finished. Because i got no replacement around, i designed this mount for my 70x70 case fan, to mount the pi there and use some of the exhaust air
it is quick replacement, but for now it works great, and maybe i improve the design more, to get it mounted in this place permanently, because the cooling is great - and no 2nd fan for the pi is needed.
one leg is missing, in view of the usb ports
How ever, u know if u need such a mount ;D but for most people it is useless :) anyway have fun !
Mounting:
just screw the pi in, or print the plugs. Push it over the M4 screwheads it should be a tight fit so no movemant can happen, thats it. How i said the design works great at the moment, and maybe i adopt it to use the M4 Screws of the fan to mount it permanently and securely.
a friend tested it too, but it loosely fits on his fan, I guess some printing calibration on his side is needed … if u facing this issue too … as workaround … put a little piece of blue tape in the holes … works great and no reprint is needed …