COVID respirator : electric fan ventilated mask
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here is an adaptation of an inhalation steam mask. It is now a COVID19 respirator with fan assistance. The fan is a…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 296
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Here is an adaptation of an inhalation steam mask. It is now a COVID19 respirator with fan assistance.
The fan is a standard 30x30 mm 5V one used to cool raspberryPI
I have added exhaust valves. They work really well, the mask is totally sealed without leaks when you breathe and close the fan inlet.
As a filter you can use cotton pads or cut it from a chirurgical mask (5 from one single mask !)
I have tried to breathe with it. The fan helps a lot altough more air would be better...
May be a 40x40 mm would push a little more air...
Power is delivered by a simple phone battery pack that you can hid into your pocket. SO that the weight is into your pocket and not on your face !
Category: Other