Sprite Extruder Cooling Fan + CRT Spacers/Brackets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spacers to allow CRT + fans to have correct spacing relative to a volcano nozzle
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 452
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
--WORK IN PROGRESS - The CRT spacer collides with the part cooling fan's screws. --
I wanted to try using the K1 Max's heatbloc combo on my Sprite Pro extruder since I wanted a volcano nozzle for more flow and it fits! issue is the longer heater + nozzle means that it'll crash into the bed before the probe does, and the part cooling fan is now a heatblock cooling fan. I made these so that the CRT and part cooling fan have the correct z-height relative to the longer nozzle.
Can be printed in any material that can withstand the heat, (PETG/ABS) - (I used ESUN pmma-like resin but I don't think it'll stand up to the heat so I do plan on replacing it soon.)
I just eyeballed the dimensions to what looks right.
PART LIST
You need to print just one of each component. No supports needed.
MOUNTING THE PART COOLING FAN:
You'll also need some m3 screws - I used M3x12 for the four screws of the right bracket. For the left Bracket, use the original screw that mounts the fan holder to the stepper, and another M3x12 screw to mount the bracket to the fan. You can use shorter screws since these do stick a bit.
MOUNTING THE CRT SPACER:
just place the spacer in between the CRT and its mount on the sprite extruder. The original screws won't work anymore, so you'll have to use longer screws. I used M3x16, but they do stick out and don't sit flush like the original screws did.