1 / 3
Marble Track Keychain — zdjęcie 1
1 / 3

Marble Track Keychain

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

0,63 € – 0,76 € netto (bez VAT)

Dla pliku: MarbeTrack_13mm_0.2mm_PLA_MINI_55m.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 0,69 € netto (środek widełek).

Masa podana przez autora
4 g
Czas druku podany przez autora
55,2 min
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

A keychain in the form of an infinite marble track, that can also serve as a spinning gadget when you are feeling bored.

Ocena
4,5 / 5
Polubienia
52
Pobrania
150
Wydruki
7
Wyświetlenia
1105
Oceny
8

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution

Features:

  • beautiful keychain with interesting shape based on a Moebius ring
  • nice to watch the different parts join in mid-air during the print
  • illustrates that 3d prints can be combined with other objects
  • useful as everyone has some key laying around that can use a keychain
  • fun little gadget with the spinning marble
  • ideal to show-off your printer to a friend and let him/her keep the print as a gift

See the spinning marble in action:

I'm interested in seeing what creative combinations of marbles and filament colors you can come up with. So post a picture of your creation, if you print one.

Print instructions

I have put two versions for different marble sizes: 13 mm (white marble in pictures) and 16 mm (orange-red marble). I prefer the smaller version for use as a keychain. But since many marbles have a larger diameter, I included a bigger version also. 

  • Optimized for 0.20mm SPEED profile (PLA)
  • Print upright with keyring hole at the top
  • Supports: For support enforcers only 
  • Add a support enforcer box at the bottom to keep the print stable.
  • Vertical shells: 4 perimeters
  • Detect bridging parameters: On
  • Insert a “Pause Print” g-code above point where two halves join to insert marble.

Small loops may occur near the top overhang. These can easily be removed with your finger nails:

NOTE: If you want scale the design to fit a different marble size, try to select a scaling factor that has as little overhang as possible on the layer before the bridge that joins the two halves together in the middle: