Marble Track Keychain
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.63 – €0.76 net (excluding VAT)
For file: MarbeTrack_13mm_0.2mm_PLA_MINI_55m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.69 excluding VAT (range midpoint).
- Weight reported by the author
- 4 g
- Print time reported by the author
- 55.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A keychain in the form of an infinite marble track, that can also serve as a spinning gadget when you are feeling bored.
- Rating
- 4.5 / 5
- Likes
- 52
- Downloads
- 150
- Makes
- 7
- Views
- 1,105
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution
Features:
- beautiful keychain with interesting shape based on a Moebius ring
- nice to watch the different parts join in mid-air during the print
- illustrates that 3d prints can be combined with other objects
- useful as everyone has some key laying around that can use a keychain
- fun little gadget with the spinning marble
- ideal to show-off your printer to a friend and let him/her keep the print as a gift
See the spinning marble in action:
I'm interested in seeing what creative combinations of marbles and filament colors you can come up with. So post a picture of your creation, if you print one.
Print instructions
I have put two versions for different marble sizes: 13 mm (white marble in pictures) and 16 mm (orange-red marble). I prefer the smaller version for use as a keychain. But since many marbles have a larger diameter, I included a bigger version also.
- Optimized for 0.20mm SPEED profile (PLA)
- Print upright with keyring hole at the top
- Supports: For support enforcers only
- Add a support enforcer box at the bottom to keep the print stable.
- Vertical shells: 4 perimeters
- Detect bridging parameters: On
- Insert a “Pause Print” g-code above point where two halves join to insert marble.
Small loops may occur near the top overhang. These can easily be removed with your finger nails:

NOTE: If you want scale the design to fit a different marble size, try to select a scaling factor that has as little overhang as possible on the layer before the bridge that joins the two halves together in the middle:

