Milwaukee hollow shaft nut driver wall mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed for Milwaukee SAE hollow magnetic nut driver set # 48-22-2507
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 76
- Wydruki
- 0
- Wyświetlenia
- 439
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Designed for Milwaukee SAE hollow magnetic nut driver set # 48-22-2507, this wall mount/holder screws to any vertical surface and provides quick access to your tools when you need them. Raised lettering allows for easy identification of each driver - especially if highlighted in a contrasting color.
The magnetic mounting feature enables the tools to stay firmly in place when stored, but allow for quick retrieval and replacement.
Requires 14x 5mm square rare earth magnets and two flat head screws
I printed with PETG-CF filament, 4 wall loops and 20% infill. Make sure to use enough walls or a solid fill (like I did) around the screw holes.
I found the easiest way to insert the magnets (which are tight by design) is to get them started and then use the flat shaft surface of one of the drivers to fully seat them into their pockets.
Please post your questions, suggestions and makes!