Gridfinity Multiconnect (multiboard) drawer system case (Redesigned with Fusion 360)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I redesigned the case of the drawer system, using fusion 360, and added Multiconnect holes.
- Ocena
- 4,667 / 5
- Polubienia
- 478
- Pobrania
- 1846
- Wydruki
- 3
- Wyświetlenia
- 14 468
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Note: In the pictures, the feet are on the top instead of the bottom, I fixed that in the model after realizing that they where feet and not just connecting pegs!
Fusion 360 redesign of the Chipp Walters' drawer system design (just the Case itself).
The source file includes neatly grouped operations so it's easy to suppress or edit specific features, including:
- Drawer retaining tabs (those are neat, but limit the height of the middle row of bins to 4U, while you can use 5U bins everywhere else)
- Hexagonal hollowing holes (for less plastic & faster print)
- Multiconnect holes (spacing is for Multiboard, but can easily be adjusted)
I included STLs of all the variants that I could think of that include the multi-connect holes (as the other ones would already be available outside of this.
WARNING: I haven't actually tested this with the original design, while I tried to stick to the dimensions, there is no guarantee at this point that they will line up, working on testing that right now.