1 / 4
Miata door bushing
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Decided to make my own door bushing since I was never fully satisfied with the one I downloaded. They were either too loose or too tight. I made mine simple with virtually no play with the correct radius so they fit properly in the cup.
Printed in PETG, 65% infill, 7 wall loop.
Don't forget to grab yourself a nice JIS screwdriver, NOT a Philips! You will wonder why you never had a set in your toolbox after trying them.
Please, leave a feedback!
Enjoy!