Pubbox cannon core
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pub box remix for cannon core motor plug.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 199
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Fully tested and built with this box at this point, if you want a pub box and want to use the cannon cores plug this is an easy way to do it.
This is a slight remix of the pub box to accept the cannon core motor plug. Also included in the files is a 3d printed m24 castle nut type deal, a standard m24 nut WILL NOT fit. In my testing so far the nut does well printed at very fine resolution I did .12 on an x1c at 100% infill in petg, ill likely do it out of nylon x or paht-cf on my build with this box but I have not tested that yet.
so far I have just tested fitment of the plug in a test piece of the box, I have oriented the plug so the retainer clip is vertical, it should work and the modifications, at least in cad don’t interfere with the thicc lid.
Ive built this box out with an ennoid mk6 controller and it worked great.
update 5/6/24: added a vented version to accept 20mm goretex vent patches
update 9/9/24 just realized i never uploaded the connector covers, they are now in the files
update 12/21/24 fixed the compatibility with the connector covers this box now has dedicated grooves and heat set holes to properly accommodate the connector covers
Thanks!