1 / 2
Smart10 game box with lid
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Game box for the Smart10 trivia game.
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 46
- Wydruki
- 1
- Wyświetlenia
- 458
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Remix to add a lid to keep cards from falling out and causing a mess. Both are privided in print orientation.
Flaws still present:
- The lid might not aim reliably in its receiver. This might depend on your card size (they could guide) and can be helped by carving a larger opening or slope. Slope might be difficult to print due to orientation but widening the receiver downwards should be easy enough.
- Original game set buttons will not fit here. Either print new ones from TPU or edit the model further.
- Round central hole is difficult to print.
Enhancement ideas:
- Score counters.
- A hinged lid that snaps in place when closed would be neat
- Round central hole is difficult to print. Perhaps 10-sided polygon would be cool.
Printing:
- Printed this with Prusaslicer, Ender 3 S1, translucent PLA.
- No supports
- 0.20mm
- Infill gyroid 10% but not important
- I forgot to set this myself and the result was ok-ish, but should have:
- extra perimeters on overhangs
- dynamic overhang speed down to 10mm/s