1 / 2
Smart10 game box with lid
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Game box for the Smart10 trivia game.
- Rating
- 5 / 5
- Likes
- 2
- Downloads
- 46
- Makes
- 1
- Views
- 458
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Noncommercial
Remix to add a lid to keep cards from falling out and causing a mess. Both are privided in print orientation.
Flaws still present:
- The lid might not aim reliably in its receiver. This might depend on your card size (they could guide) and can be helped by carving a larger opening or slope. Slope might be difficult to print due to orientation but widening the receiver downwards should be easy enough.
- Original game set buttons will not fit here. Either print new ones from TPU or edit the model further.
- Round central hole is difficult to print.
Enhancement ideas:
- Score counters.
- A hinged lid that snaps in place when closed would be neat
- Round central hole is difficult to print. Perhaps 10-sided polygon would be cool.
Printing:
- Printed this with Prusaslicer, Ender 3 S1, translucent PLA.
- No supports
- 0.20mm
- Infill gyroid 10% but not important
- I forgot to set this myself and the result was ok-ish, but should have:
- extra perimeters on overhangs
- dynamic overhang speed down to 10mm/s