Filament holder for CR-10v3 with guide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Added guides so the filament comes straight down after the filament sensor regardless of the position of the extruder.…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 375
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Added guides so the filament comes straight down after the filament sensor regardless of the position of the extruder.
filament-holder.stl:
Is not changed.
filament-stander V2.stl:
Tested and working.
My CR10V3 came with guide rollers underneath the filament sensor.
i edited the design so the roles can be placed underneath the filament sensor again.
also created 2 slots so the filament holder slides all the way down over the original guide roller mounts.
filament-stander beta V2 non roller.stl:
Version with solid guide for printers that came without rollers.
Not tested, doesn't fit my printer.
Let me know if there are any problems.
I would suggest putting something in place to prevent the filament getting stuck under the spool.
This can be achieved by putting a short length of filament through the
hole's in the side of the spool (white length in the picture)
This will vary depending what spool is used.
Print Settings:
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
10%
Filament:
PLA