KeepCup (8oz) band replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My KeepCup had a cork band around it.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 547
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
My KeepCup had a cork band around it.
You are not meant to remove it or fiddle with it too much, but I like to live dangerously and, as a result, I broke it.
You can buy a replacement on their website for 5 dollars, but that would have been too easy.
I reproduced it on Freecad and now you can also print your own.
Print instructions
Use band-2.stl if you are going to print this with a flexible material like TPU.
If you print that file with PLA, PETG or any other rigid material, you wont be able to fit it to your cup.
Use band-2-split.stl you are not going to print this on a flexible material.
It has split on one side that should allow you to fit the replacement to your cup.