KeepCup (8oz) band replacement
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My KeepCup had a cork band around it.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 51
- Makes
- 0
- Views
- 547
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
My KeepCup had a cork band around it.
You are not meant to remove it or fiddle with it too much, but I like to live dangerously and, as a result, I broke it.
You can buy a replacement on their website for 5 dollars, but that would have been too easy.
I reproduced it on Freecad and now you can also print your own.
Print instructions
Use band-2.stl if you are going to print this with a flexible material like TPU.
If you print that file with PLA, PETG or any other rigid material, you wont be able to fit it to your cup.
Use band-2-split.stl you are not going to print this on a flexible material.
It has split on one side that should allow you to fit the replacement to your cup.